•
  • EnGenius EWS356-FIT Product Photo
  • EnGenius EWS356-FIT Product Photo
  • EnGenius EWS356-FIT Product Photo
  • EnGenius EWS356-FIT Product Photo
Agotado

EWS356-FIT: Punto de acceso inalámbrico Wi-Fi 6 para interiores EnGenius Fit 2×2 con adaptador (valorado en 10 $)

$59.99
Spend $75.00 to FREE SHIPPING


Ver todos los detalles
%3Cp%3EGana%20[points_amount]%20cuando%20compres%20este%20art%C3%ADculo.%3C/p%3E

Customer Reviews

Overall rating: 4.7 / 5 from 41 reviews.

Customer photo review of EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Love it electrically as I always have liked your products. We were replacing 5th gen with 6th gen. And it's fast, as shown! Physically we have 2 issues with the new units. The previous gen was round, which made mounting orientation on a ceiling a non issue. {no wrong angle, as opposed to now needing to square the mounting]. The second issue is the new mounting bracket extends the unit 1/2 inch off the ceiling, where as the previous was flush. This does not loo as good, and allows the opening for the ethernet cable in the ceiling to be more visible. I fashioned my own flush mount to address this issue.

Gary S. 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Customer photo review of EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

This is a review for the AX3000 (EWS356-Fit).This unit made me stop my bad habit of making cheap-routers-stuck-in-AP-mode-with-cables-everywhere work for my home network. I was previously holding out for a UniFi AP, but I saw these pop-up seemingly out of nowhere and for literally half the cost.It's a little slow to fully broadcast from a cold-boot; not more than 3-5 minutes each time, but noticeable. This is probably either the cheap switch I'm using, the fact that it's running in PoE-mode, or some other experience issue. But once it's up, the signal has no issue reaching the floor below it and my phone as I stand in the driveway. The menu is VERY simple and easy to work with, and the level of control compared to normal consumer hardware that I've just "made work" in the past is VERY nice.Keeping the unit in the same room that the previous access point it was replacing in, I saw a download speed increase of 120 Mbps. I am no longer in the "I don't care about the newest 802.11" crowd.As others have said; there isn't really a good way to flush-mount the thing without modifying the included T-Rails. The gap (for me) was about ~1/2", maybe a little less. It was not a deal breaker for me, but it's worth pointing out.I will definitely be getting at least one more to test the mesh capabilities. Strongly recommend.

⠀ 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Customer photo review of EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

I bought the AP for my house to extend my WiFi. I did not have a PoE switch so I needed a power adapter. I searched For the adapter and found that EnGenius had bunch of YouTube videos and I found one for setting up this AP. Within in the video, it directed me to the power adapter I needed. GREAT JOB on the video. I went to their web site to find the power adapter when their chat service popped up. I was greeted by their support agent and they directed me to their online store. I bought the power adapter and then followed the video and set up my AP in no time. EnGenius really made the set up fast and easy. I tested my connection to this AP and it was fast! I am pretty happy with this purchase.

Charles L. 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Upgraded from WIFI5 to WIFI6 and I think it's a good time since these are on sale to make room for new WIFI7 devices.Installation was dead easy with the FitController. I was going to use these in standalone mode but I saw a returned controller sold by Amazon for just $60 so that was a no brainer. It's really plug and play. The FitController handles all of the setup for new APs connected to the network.Really good signal strength compared to that Orbi crap. I'm actually getting AX speed with my laptop whereas on the Orbi it was about the same as AC. Plus these are hardwired APs instead of that unreliable wireless mesh system and even when you hardwire the Orbi, getting it to work properly was a bit of a challenge. I don't know if it was software or hardware or both but on the Orbi, hardwire connections on satellites would just die randomly and it would take forever for that satellite to get back on network.This might even be easier to setup and deploy than Ubiquity and costing a lot less as well. Nice work, Engenius.

Foureight84 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

It does L2 isolation, client isolation, and vlan isolation, your choice. Until a few weeks ago I had no idea what this meant. I had to return an eap650/omada because I wasn't able to properly isolate/vlan my iot devices. I could do a guest network which enabled isolation but then I couldn't pick off individual devices to pass through to my hassos or phone. This device allows full paranoia. Yes, you can easily click create a 'guest network' and funnel those only to the internet, but the iot stuff usually needs more nuance. Device isolation keeps your filthy iot devices from infecting each other and then you can add vlan tags to do additional L3 stuff at your firewall, eg, keep it off your LAN, allow a device/s to your phone/s for whatever, let some devices connect to hassos.Plus, it's made it Taiwan, not China.More to come......mesh setup: it has settings for setting up mesh but I can't get a new ap to connect to the existing ap in mesh mode. I had to setup an identical set of ssid's/wpa2 and then 'fast roaming' for each ssid to enable the seamless handoff between ap's. I'm in standalone mode, maybe the controller does this easier. Also I'm on f/w 1.0.4.

Nc2345 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Overall this seems to be a good access point. We integrate these types of units for small businesses. I had previously accepted that Cloud Management for Engenius AP's is how things are done now, only to learn this model (at the time of this review) is the traditional LAN-only management. Not a major issue, and perhaps a plus for some buyers.

Amazon C. 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

I've only had these installed for 18 hours but I can say, so far, quite satisfied with them. 2600 sq ft split level home.Background: I grew tired of netgear not updating my Orbi units for the web interface, where they no longer can do a SSL key exchange for the web interface on updated browsers. Pretty lame Netgear for a year and a half old system. I put those in AP mode and used my Ubiquity EdgeRouter to handle firewall and routing and my pihole to hand out DHCP, I put those Orbis in AP mode. Streaming from my phones and smart devices suffered big time. It's almost like AP mode broke the mesh of the orbi and satellite. SO I did a little research and I already have a POE Switch so I found these.Installation: Installing was a breeze. The included mounts are good enough for most situations. I opted for using the App for setup, but I do like the fact that these can operate Stand-alone in case the app dies or this company goes away. I set up my SSIDs as I had them on my Orbi, and after about 10 minutes or so everything was working at speeds I was used to.Difficulties: The App's push settings to the APs take a bit of time, and the app logs in every time you open it. I don't foresee me having to manage these often since it's just my home network, but minor tweaks may be in order to 5ghz channels. Firmware updates are defaulted to Sundays at 2am, but it would be nice to force updates when I want.Overall: These are providing a much better streaming experience than my Orbi setup in AP mode, and nearly identical when the Orbis were running the show themselves. If anything, these APs give me more control and flexibility.I'll update this review if these APs prove ot be unreliable, but so far, I'm happy!

Woojo 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Everything is awesome with these 2 WAPs (bought 2 to replace older ones) , excepting the IP address assignment: they have their own DHCP built-in with the 172.16.xx.xx block. No worries for me who been in IT for over 35 years and know how to add their route to my existing main router. Bringing this up for others who may not know how to add they will find out printers are not working if those devices are hardwired...

Peter T. 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

The feature set is solid. I feel like I've gotten my money's worth from this device. However the usability of the WebUI needs some work. It has the wrong product at the top causing me to do a double take and check I actually got the right thing. Also, the navigation through the settings is hap-hazard at best. It's very difficult to find where a specific thing is. There are mandatory popup windows, and some options are poorly labeled. The multiple ssid and vlan options are useful. Signal strength isn't anything to write home about, but it is acceptable, my previous router did better (mounted in the same location). I also noticed quite a bit of web traffic from it as soon as I plugged it in. I haven't analysed it, but if privacy is a concern of yours you may want to dig a little deeper before commiting on this.

Ronald M. 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

This is a truly unbeatable value for a highly configurable WiFi6 PoE access point. The app and online cloud functionality works well enough. Great coverage and speeds. The case design makes it virtually impossible to cleanly mount it on a wall/ceiling so if that's your goal, look elsewhere. Wish they kept their old "smoke alarm" style which was super easy to mount on a ceiling. I absolutely don't understand the drop ceiling rail mounting style for something being marketed as a SOHO device. For best results, this is not a plug and play option but if you know how to configure it (or wiling to learn), you will not be disappointed.

Kindle C. 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

I replaced my older Ubquiti Unifi AP Pro AC with this. My speeds over WiFi doubled with 802.11AX WiFi 6. The signal doesnt go quite as far, but setup was easy and the signal goes as far as I need it to.Side note, the SSIDs gave me a lot of trouble because it would not broadcast. What I had to do to fix it was remove all SSIDs completely even the defaults. Issue the AP a reboot. Confirmed deletion and made the new ones. Waited 10 minutes, then rebooted again and after another 10 minutes they showed up and worked.

Chris W. 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

This WAP works as promised and, using the app, was easy to set up in a basic configuration. Speed is good and it doesn't drop connections in my environment.Having said that, the setup app isn't really designed for walking you through the most common use for a WAP, that of creating a multi-access point single-SSID network. I set it up using the default SSIDs and it works but I found that it wasn't clear how to get what I wanted. A little Google research got me what I needed to know (configure your router and the WAP to use a static IP address) and then use the same SSID name/password for each WAP installed.

Bunkie 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Needed a 3rd Mesh Node to cover some dead zones at my house. I had a 2 node mesh already configured between models EWS377APv3 and EWS357APv3. I went to purchase another EWS357APv3 and it appears they went EOL and cant be found any longer. Took a chance on the newer cheaper model - EWS356-FIT and it joined the mesh without any issues. Configuration pages are the same as the older models which is great. I do not use the cloud features and just use the local configuration (which is what I wanted). These are really solid AP's.

Adam R. 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

The EnGenius EWS356-FIT is a remarkable Wi-Fi 6 access point that delivers impressive performance, easy setup, affordable pricing, and smooth coverage. I experienced a significant boost in network speed and stability, making it perfect for streaming, gaming, and video conferences. Setting it up was a breeze thanks to the user-friendly app, and the affordable price makes it a smart investment. The access point's powerful signal strength and intelligent beamforming ensure seamless coverage throughout my home, eliminating any dead zones. If you're looking for a high-performance, cost-effective Wi-Fi upgrade, the EWS356-FIT is an excellent choice.

Kevin S. 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

EWS356-FIT with a straightforward installation process save my time and effort. It come with clear instructions and automated setup. By minimizing technical hurdles and complexities, easy installation allows me to quickly get up and running with the EWS356-FIT, making it accessible even to people like me with limited technical knowledge.It come with intuitive user interface is designed with the user in mind, emphasizing ease of use and simplicity. Intuitive interfaces make it easier for me to navigate through features, customize settings, and accomplish tasks, ultimately l have satisfying user experience.It is simple to use or managed allow me to focus on my tasks rather than dealing with complex configurations or tedious maintenance.AP that offer ultra-fast speed prioritize optimized algorithms, efficient resource utilization, and high-bandwidth capabilities.This AP with a stable connection is essential for uninterrupted communication, data transfer, and online activities. For wireless connection, I rely on consistent and reliable performance. It provide a stable connection incorporate robust networking protocols and signal optimization techniques.

El 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

EWS356-FIT: Punto de acceso inalámbrico Wi-Fi 6 para interiores EnGenius Fit 2×2 con adaptador (valorado en 10 $)

$59.99

Indoor Access Point speeds up to 2400Mbps on 5GHz and 574Mbps on 2.4GHz

The EnGenius Fit Managed EWS356-FIT Wi-Fi 6 2x2 indoor wireless access point is a business-class device that provides secure and reliable high performance while reducing capital and operating expenses for cost-conscious small businesses. With support for the latest 802.11ax technology on the Qualcomm® platform, this access point can deliver maximum speeds of 574 Mbps (2.4 GHz) and 2,400 Mbps (5 GHz). Additionally, it features an easy-to-use web interface for cloud or on-premises management options based on network architecture and technical aptitude.

Additional Power Options >

- EWS356-FIT Datasheet
- EWS356-FIT Quick Start Guide
- EnGenius Fit FAQs
- EnGenius Fit Access Point Series
- EnGenius Fit Network Management Datasheet

Envíos y devoluciones

¿No está satisfecho? Permitimos devoluciones dentro de los 30 días posteriores a la compra del producto.

Gestión

Este producto es compatible con la línea de productos EnGenius Fit

Wi-Fi 6

Admite hasta 2400 Mbps en la banda de 5 GHz y 574 Mbps en la banda de 2,4 GHz

Customer Reviews

Overall rating: 4.7 / 5 from 41 reviews.

Customer photo review of EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Love it electrically as I always have liked your products. We were replacing 5th gen with 6th gen. And it's fast, as shown! Physically we have 2 issues with the new units. The previous gen was round, which made mounting orientation on a ceiling a non issue. {no wrong angle, as opposed to now needing to square the mounting]. The second issue is the new mounting bracket extends the unit 1/2 inch off the ceiling, where as the previous was flush. This does not loo as good, and allows the opening for the ethernet cable in the ceiling to be more visible. I fashioned my own flush mount to address this issue.

Gary S. 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Customer photo review of EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

This is a review for the AX3000 (EWS356-Fit).This unit made me stop my bad habit of making cheap-routers-stuck-in-AP-mode-with-cables-everywhere work for my home network. I was previously holding out for a UniFi AP, but I saw these pop-up seemingly out of nowhere and for literally half the cost.It's a little slow to fully broadcast from a cold-boot; not more than 3-5 minutes each time, but noticeable. This is probably either the cheap switch I'm using, the fact that it's running in PoE-mode, or some other experience issue. But once it's up, the signal has no issue reaching the floor below it and my phone as I stand in the driveway. The menu is VERY simple and easy to work with, and the level of control compared to normal consumer hardware that I've just "made work" in the past is VERY nice.Keeping the unit in the same room that the previous access point it was replacing in, I saw a download speed increase of 120 Mbps. I am no longer in the "I don't care about the newest 802.11" crowd.As others have said; there isn't really a good way to flush-mount the thing without modifying the included T-Rails. The gap (for me) was about ~1/2", maybe a little less. It was not a deal breaker for me, but it's worth pointing out.I will definitely be getting at least one more to test the mesh capabilities. Strongly recommend.

⠀ 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Customer photo review of EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

I bought the AP for my house to extend my WiFi. I did not have a PoE switch so I needed a power adapter. I searched For the adapter and found that EnGenius had bunch of YouTube videos and I found one for setting up this AP. Within in the video, it directed me to the power adapter I needed. GREAT JOB on the video. I went to their web site to find the power adapter when their chat service popped up. I was greeted by their support agent and they directed me to their online store. I bought the power adapter and then followed the video and set up my AP in no time. EnGenius really made the set up fast and easy. I tested my connection to this AP and it was fast! I am pretty happy with this purchase.

Charles L. 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Upgraded from WIFI5 to WIFI6 and I think it's a good time since these are on sale to make room for new WIFI7 devices.Installation was dead easy with the FitController. I was going to use these in standalone mode but I saw a returned controller sold by Amazon for just $60 so that was a no brainer. It's really plug and play. The FitController handles all of the setup for new APs connected to the network.Really good signal strength compared to that Orbi crap. I'm actually getting AX speed with my laptop whereas on the Orbi it was about the same as AC. Plus these are hardwired APs instead of that unreliable wireless mesh system and even when you hardwire the Orbi, getting it to work properly was a bit of a challenge. I don't know if it was software or hardware or both but on the Orbi, hardwire connections on satellites would just die randomly and it would take forever for that satellite to get back on network.This might even be easier to setup and deploy than Ubiquity and costing a lot less as well. Nice work, Engenius.

Foureight84 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

It does L2 isolation, client isolation, and vlan isolation, your choice. Until a few weeks ago I had no idea what this meant. I had to return an eap650/omada because I wasn't able to properly isolate/vlan my iot devices. I could do a guest network which enabled isolation but then I couldn't pick off individual devices to pass through to my hassos or phone. This device allows full paranoia. Yes, you can easily click create a 'guest network' and funnel those only to the internet, but the iot stuff usually needs more nuance. Device isolation keeps your filthy iot devices from infecting each other and then you can add vlan tags to do additional L3 stuff at your firewall, eg, keep it off your LAN, allow a device/s to your phone/s for whatever, let some devices connect to hassos.Plus, it's made it Taiwan, not China.More to come......mesh setup: it has settings for setting up mesh but I can't get a new ap to connect to the existing ap in mesh mode. I had to setup an identical set of ssid's/wpa2 and then 'fast roaming' for each ssid to enable the seamless handoff between ap's. I'm in standalone mode, maybe the controller does this easier. Also I'm on f/w 1.0.4.

Nc2345 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Overall this seems to be a good access point. We integrate these types of units for small businesses. I had previously accepted that Cloud Management for Engenius AP's is how things are done now, only to learn this model (at the time of this review) is the traditional LAN-only management. Not a major issue, and perhaps a plus for some buyers.

Amazon C. 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

I've only had these installed for 18 hours but I can say, so far, quite satisfied with them. 2600 sq ft split level home.Background: I grew tired of netgear not updating my Orbi units for the web interface, where they no longer can do a SSL key exchange for the web interface on updated browsers. Pretty lame Netgear for a year and a half old system. I put those in AP mode and used my Ubiquity EdgeRouter to handle firewall and routing and my pihole to hand out DHCP, I put those Orbis in AP mode. Streaming from my phones and smart devices suffered big time. It's almost like AP mode broke the mesh of the orbi and satellite. SO I did a little research and I already have a POE Switch so I found these.Installation: Installing was a breeze. The included mounts are good enough for most situations. I opted for using the App for setup, but I do like the fact that these can operate Stand-alone in case the app dies or this company goes away. I set up my SSIDs as I had them on my Orbi, and after about 10 minutes or so everything was working at speeds I was used to.Difficulties: The App's push settings to the APs take a bit of time, and the app logs in every time you open it. I don't foresee me having to manage these often since it's just my home network, but minor tweaks may be in order to 5ghz channels. Firmware updates are defaulted to Sundays at 2am, but it would be nice to force updates when I want.Overall: These are providing a much better streaming experience than my Orbi setup in AP mode, and nearly identical when the Orbis were running the show themselves. If anything, these APs give me more control and flexibility.I'll update this review if these APs prove ot be unreliable, but so far, I'm happy!

Woojo 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Everything is awesome with these 2 WAPs (bought 2 to replace older ones) , excepting the IP address assignment: they have their own DHCP built-in with the 172.16.xx.xx block. No worries for me who been in IT for over 35 years and know how to add their route to my existing main router. Bringing this up for others who may not know how to add they will find out printers are not working if those devices are hardwired...

Peter T. 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

The feature set is solid. I feel like I've gotten my money's worth from this device. However the usability of the WebUI needs some work. It has the wrong product at the top causing me to do a double take and check I actually got the right thing. Also, the navigation through the settings is hap-hazard at best. It's very difficult to find where a specific thing is. There are mandatory popup windows, and some options are poorly labeled. The multiple ssid and vlan options are useful. Signal strength isn't anything to write home about, but it is acceptable, my previous router did better (mounted in the same location). I also noticed quite a bit of web traffic from it as soon as I plugged it in. I haven't analysed it, but if privacy is a concern of yours you may want to dig a little deeper before commiting on this.

Ronald M. 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

This is a truly unbeatable value for a highly configurable WiFi6 PoE access point. The app and online cloud functionality works well enough. Great coverage and speeds. The case design makes it virtually impossible to cleanly mount it on a wall/ceiling so if that's your goal, look elsewhere. Wish they kept their old "smoke alarm" style which was super easy to mount on a ceiling. I absolutely don't understand the drop ceiling rail mounting style for something being marketed as a SOHO device. For best results, this is not a plug and play option but if you know how to configure it (or wiling to learn), you will not be disappointed.

Kindle C. 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

I replaced my older Ubquiti Unifi AP Pro AC with this. My speeds over WiFi doubled with 802.11AX WiFi 6. The signal doesnt go quite as far, but setup was easy and the signal goes as far as I need it to.Side note, the SSIDs gave me a lot of trouble because it would not broadcast. What I had to do to fix it was remove all SSIDs completely even the defaults. Issue the AP a reboot. Confirmed deletion and made the new ones. Waited 10 minutes, then rebooted again and after another 10 minutes they showed up and worked.

Chris W. 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

This WAP works as promised and, using the app, was easy to set up in a basic configuration. Speed is good and it doesn't drop connections in my environment.Having said that, the setup app isn't really designed for walking you through the most common use for a WAP, that of creating a multi-access point single-SSID network. I set it up using the default SSIDs and it works but I found that it wasn't clear how to get what I wanted. A little Google research got me what I needed to know (configure your router and the WAP to use a static IP address) and then use the same SSID name/password for each WAP installed.

Bunkie 4/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Needed a 3rd Mesh Node to cover some dead zones at my house. I had a 2 node mesh already configured between models EWS377APv3 and EWS357APv3. I went to purchase another EWS357APv3 and it appears they went EOL and cant be found any longer. Took a chance on the newer cheaper model - EWS356-FIT and it joined the mesh without any issues. Configuration pages are the same as the older models which is great. I do not use the cloud features and just use the local configuration (which is what I wanted). These are really solid AP's.

Adam R. 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

The EnGenius EWS356-FIT is a remarkable Wi-Fi 6 access point that delivers impressive performance, easy setup, affordable pricing, and smooth coverage. I experienced a significant boost in network speed and stability, making it perfect for streaming, gaming, and video conferences. Setting it up was a breeze thanks to the user-friendly app, and the affordable price makes it a smart investment. The access point's powerful signal strength and intelligent beamforming ensure seamless coverage throughout my home, eliminating any dead zones. If you're looking for a high-performance, cost-effective Wi-Fi upgrade, the EWS356-FIT is an excellent choice.

Kevin S. 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

EWS356-FIT with a straightforward installation process save my time and effort. It come with clear instructions and automated setup. By minimizing technical hurdles and complexities, easy installation allows me to quickly get up and running with the EWS356-FIT, making it accessible even to people like me with limited technical knowledge.It come with intuitive user interface is designed with the user in mind, emphasizing ease of use and simplicity. Intuitive interfaces make it easier for me to navigate through features, customize settings, and accomplish tasks, ultimately l have satisfying user experience.It is simple to use or managed allow me to focus on my tasks rather than dealing with complex configurations or tedious maintenance.AP that offer ultra-fast speed prioritize optimized algorithms, efficient resource utilization, and high-bandwidth capabilities.This AP with a stable connection is essential for uninterrupted communication, data transfer, and online activities. For wireless connection, I rely on consistent and reliable performance. It provide a stable connection incorporate robust networking protocols and signal optimization techniques.

El 5/5 Verified

EWS356-FIT: EnGenius Fit 2×2 Indoor Wireless Wi-Fi 6 Access Point with Adapter ($10 Value)

Características

EnGenius EWS356-FIT Overview

Descripción general

EnGenius EWS356-FIT In-the-Box

En la caja

EnGenius EWS356-FIT Mounting

Montaje

EnGenius EWS356-FIT Deployment

Despliegue

EWS356-FIT

Presupuesto

Aspectos destacados del producto

  • Arquitectura 802.11ax dual concurrente y compatible con versiones anteriores de dispositivos cliente 11ac/a/b/g/n; antena 2x2

  • Admite hasta 2400 Mbps en la banda de frecuencia de 5 GHz y 574 Mbps en la banda de frecuencia de 2,4 GHz

  • Seleccione opciones de administración en la nube o en las instalaciones según la arquitectura de red y los permisos administrativos.

  • Visibilidad y control de la nube desde cualquier lugar

  • Configuración en minutos con instrucciones paso a paso basadas en la aplicación

  • Registro de dispositivos de escaneo rápido, monitoreo remoto y resolución de problemas

  • Métricas del sistema en tiempo real, análisis y configuraciones remotas

  • Sin licencias de puntos de acceso ni tarifas de suscripción

  • El enlace ascendente y descendente de OFDMA mejora la transmisión a los AP y dispositivos cliente

  • Tiempo de activación objetivo para el ahorro de energía de los dispositivos cliente e IoT

  • Enlace ascendente y descendente de MU-MIMO para una señal óptima y confiabilidad de recepción para hasta 2 dispositivos

  • Coloración BSS para etiquetar paquetes con un “color” para diferenciarlos entre conjuntos de servicios básicos adyacentes

Técnico

Normas
IEEE 802.11ax en 2,4 GHz
IEEE 802.11ax en 5 GHz
Compatible con versiones anteriores de 802.11a/b/g/n/ac

Procesador
CPU Qualcomm® de cuatro núcleos ARM Cortex A53s a 1,0 GHz

Antena
2 x 2,4 GHz: 4 dBi
2 x 5 GHz: 5 dBi
Antena omnidireccional integrada

Interfaz física
1 puerto Ethernet 10/100/1000 BASE-T, RJ-45
1 conector de CC
1 botón de reinicio

Indicadores LED
1 x Poder
1 x LAN
1 x 2,4 GHz
1 x 5 GHz

Fuente de energía
Alimentación a través de Ethernet: entrada 802.3af
12 VCC/1,5 A

Consumo máximo de energía
12,8 W

Especificaciones inalámbricas y de radio

Frecuencia de operación
Radio dual concurrente de 2,4 GHz y 5 GHz

Modos de operación
AP, Malla

Radio de frecuencia
2,4 GHz: 2400 MHz ~ 2482 MHz
5 GHz: 5150 MHz ~ 5250 MHz, 5250 MHz ~ 5350 MHz, 5470 MHz ~ 5725 MHz, 5725 MHz ~ 5850 MHz

Potencia de transmisión
Hasta 21 dBm en 2,4 GHz
Hasta 21 dBm en 5 GHz

Formación de haz de transmisión (TxBF)

Cadenas de radio/Transmisión espacial
2x2:2

SU-MIMO
Dos (2) transmisiones espaciales SU-MIMO para 2,4 GHz y dos (2) transmisiones espaciales SU-MIMO para 5 GHz hasta una velocidad de datos inalámbrica de 2974 Mbps a un solo dispositivo cliente inalámbrico 11ax bajo radios de 2,4 GHz y 5 GHz.

MU-MIMO
Dos (2) transmisiones espaciales múltiples (MU)-MIMO para una velocidad de datos inalámbrica de hasta 2400 Mbps para transmitir a uno (1) dispositivo cliente inalámbrico con capacidad para dos transmisiones MU-MIMO 11ax por debajo de 5 GHz simultáneamente.

Dos (2) múltiples (MU)-MIMO para una velocidad de datos inalámbrica de hasta 574 Mbps para transmitir a uno (1) dos dispositivos cliente inalámbricos con capacidad MU-MIMO 11ax de flujos inferiores a 2,4 GHz simultáneamente.

Velocidades de datos admitidas (Mbps)
802.11ax:
2,4 GHz: 9 a 574 (MCS0 a MCS11, NSS = 1 a 2)
5 GHz: 18 a 2400 (MCS0 a MSC11, NSS = 1 a 2)
802.11b: 1, 2, 5.5, 11
802.11a/g: 6, 9, 12, 18, 36, 48, 54
802.11n: 6,5 a 300 Mbps (MCS0 a MCS15)
802.11ac: 6,5 a 867 Mbps (MCS0 a MCS9, NSS = 1 a 2)

Tecnologías de radio compatibles
802.11ax: Acceso múltiple por división de frecuencia ortogonal (OFDMA)
802.11b: Espectro ensanchado por secuencia directa (DSSS)
802.11ac/a/g/n: División múltiple de frecuencia ortogonal (OFDM)

Canalización
802.11ax admite alta eficiencia (HE): HE 20/40/80/160 MHz
802.11ac admite un rendimiento muy alto (VHT): VHT 20/40/80 MHz
802.11n admite alto rendimiento (HT): HT 20/40 MHz
802.11n admite un rendimiento muy alto en la radio de 2,4 GHz: VHT40 MHz (256-QAM)
Agregación de paquetes 802.11n/ac/ax: A-MPDU, A-SPDU

Modulación compatible
802.11ax: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM, 1024-QAM
802.11ac: BPSK, QPSK, 16-QAM, 64-QAM, 256-QAM
802.11a/g/n: BPSK, QPSK, 16-QAM, 64-QAM
802.11b: BPSK, QPSK, CCK

Gestión

Múltiples BSSID
8 SSID para radios de 2,4 GHz y 5 GHz.

Etiquetado de VLAN
Admite etiquetado SSID a VLAN 802.1q
Paso a través de VLAN entre bandas
VLAN de administración

Árbol de expansión
Admite el protocolo de árbol de expansión 802.1d

QoS (Calidad de Servicio)
Cumple con el estándar IEEE 802.11e
WMM

SNMP
versión 1, versión 2c, versión 3

MIB
I/II, MIB privado

Seguridad inalámbrica
WPA3
WPA2 Enterprise (AES)
WPA2 AES-PSK
Ocultar SSID en Beacons
Filtrado de direcciones MAC, hasta 32 MAC por SSID
Lista de conectados de STA (cliente) inalámbricos
Túnel SSH
Aislamiento del cliente

Ambiental y físico

Rango de temperatura
En funcionamiento: 32ºF~104ºF (0 ºC~40 ºC)
Almacenamiento: -40 ºC~176 ºF (-40 ºC~80 ºC)

Humedad (sin condensación)
Operando: 90% o menos
Almacenamiento: 90% o menos

Dimensiones y pesos

Dispositivo EWS356-FIT
Peso: 0,83 libras (380 g)
Longitud: 6,30" (160 mm)
Ancho: 6,30" (160 mm)
Altura: 1,31" (33,2 mm)

Embalaje EWS356-FIT
Peso: 1,28 libras (580 g)
Longitud: 8,07" (205 mm)
Ancho: 8,07" (205 mm)
Altura: 3,27" (83 mm)

Contenido del paquete
1 - Punto de acceso interior gestionado por la nube EWS356-FIT
1 – Base de montaje en techo (recorrido de 9/16”)
1 – Base de montaje en techo (recorrido de 15/16”)
1 - Kits de tornillos para montaje en techo y pared
Guía de inicio rápido Código QR
Código QR de la aplicación móvil

Certificaciones
Comisión Federal de Comunicaciones (FCC)
CE
CI

Garantía
1 año





Fuentes de alimentación EWS356-FIT

EnGenius ACP12V2A Product Photo
ACP12V2A: Adaptador de corriente
$14.00
EnGenius EPA5006GAT Product Photo EnGenius EPA5006GAT Product Photo
EPA5006GAT: Adaptador de alimentación a través de Ethernet Gigabit 802.3at/af
$24.99
EnGenius EPA5006GP Product Photo EnGenius EPA5006GP Product Photo
EPA5006GP: Adaptador Gigabit pasivo de alimentación por Ethernet de 54 V
$28.99
EnGenius EPA5006GR Product Photo EnGenius EPA5006GR Product Photo
EPA5006GR: Adaptador PoE Gigabit de 32 vatios con botón de reinicio
$34.99
EnGenius EWS7952FP-FIT Product Photo EnGenius EWS7952FP-FIT Product Photo
EWS7952FP-FIT: Conmutador PoE+ Gigabit de 740 W y 48 puertos EnGenius Fit
$599.00
Agotado
EnGenius EWS7952P-FIT Product Photo EnGenius EWS7952P-FIT Product Photo
EWS7952P-FIT: Conmutador EnGenius Fit de 410 W Gigabit PoE+ de 48 puertos
$499.00
EnGenius EWS7928FP-FIT Product Photo EnGenius EWS7928FP-FIT Product Photo
EWS7928FP-FIT: Conmutador Gigabit EnGenius Fit de 410 W PoE+ de 24 puertos
$349.00
EnGenius EWS7928P-FIT Product Photo EnGenius EWS7928P-FIT Product Photo
EWS7928P-FIT: Conmutador EnGenius Fit de 24 puertos de alimentación a través de Ethernet 240 W Gigabit PoE+
$299.00
EWS2910FP-FIT Product Photo EWS2910FP-FIT Product Photo
EWS2910FP-FIT: Conmutador EnGenius Fit Gigabit PoE+ de 110 W y 8 puertos
$139.00
EWS2910P-FIT Product Photo EWS2910P-FIT Product Photo
EWS2910P-FIT: Switch Gigabit PoE de 8 puertos EnGenius Fit de 55 W
$119.00

Puntos de acceso inalámbricos EnGenius Fit

EnGenius EWS276-FIT Product Photo EnGenius EWS276-FIT Product Photo
EWS276-FIT: Punto de acceso Wi-Fi 6 inalámbrico para interiores EnGenius Fit 4×4
$149.00
Agotado
EWS356-FIT: Punto de acceso inalámbrico Wi-Fi 6 para interiores EnGenius Fit 2×2 con adaptador (valorado en 10 $) EnGenius EWS356-FIT Product Photo
EWS356-FIT: Punto de acceso inalámbrico Wi-Fi 6 para interiores EnGenius Fit 2×2 con adaptador (valorado en 10 $)
$59.99
Agotado
EnGenius EWS850-FIT Product Photo EnGenius EWS850-FIT Product Photo
EWS850-FIT: Punto de acceso inalámbrico para exteriores EnGenius Fit Wi-Fi 6 2×2
$299.00