EnStationAC-KIT: Long Range 11AC Wireless Outdoor Bridge Kit
Earn [points_amount] when you buy this item.
EnStationAC-KIT: Long Range 11AC Wireless Outdoor Bridge Kit
High Speeds & Optimal Bandwidth at Extended Point-to-Point or Point-to-Multi-Point Ranges
The EnGenius EnStationAC KIT 5 GHz Outdoor 802.11ac Wave 2 Wireless Client Bridge/AP, featuring Time Division Multiple Access, cuts through RF-congested environments within Point-to-Point/MultiPoint applications. EnJet enabled the EnStationAC assigns time slots to each station, providing faster and more stable performance and avoiding the hidden node issue. With a high-gain 19 dBi dual-polarized directional antenna that extends the network up to 5 miles point-to-point. Use the EnStationAC’s secondary PoE pass through Gigabit port to power an additional PoE-compliant device such as an IP surveillance camera.
This kit includes two (2) EnStationAC Wireless Outdoor Bridges
- EnStationAC Datasheet
- EnStationAC Quick Install Guide
- EnStationAC User Manual
- Managed Station Series Datasheet
Shipping & Returns
Not satisfied? We allow returns within 30 days of product purchase
Flexible Management
Operation Modes: Access Point, Client Bridge, WDS Access Point, WDS Station
11ac Wave 2
Supports wireless speeds up to 867Mbps on the 5GHz frequency band
Features
Specifications
- EnJet technology features Time Division Multiple Access, cutting through RF-congested environments
- 11ac Wave 2 wireless speeds up to 867 Mbps on 5 GHz
- MU-MIMO improves performance & increases user device capacities
- Beamforming optimizes antenna signal, reception & reliability for device
- High 26 dBm transmit power extends and high Gain 19 dBi Directional Antennas
- IP55-Rated weatherproof & dustproof housing
- GigE PoE port & adapter included
Standards
IEEE 802.11ac wave2/a/n on 5 GHz
Processor
Powerful Qualcomm® CPU
Antenna
High-Gain 19 dBi Integrated Directional Antennas
5 GHz (Port 1)
Average Antenna Gain: 19 dBi
Polarization: Linear
Azimuth Beam Width: 30°
Elevation Beam-Width: 18°
VSWR: 1:2.0
5 GHz (Port 2)
Average Antenna Gain: 19 dBi
Polarization: Linear
Azimuth Beam Width: 18°
Elevation Beam-Width: 30°
VSWR: 1:2.0
Physical Interface
2 x 10/100/1000 Base-TX, RJ-45 Gigabit Ethernet Ports
1 x Reset Button
LED Indicators
Power
LAN1
LAN2
WLAN
Signal
Power Source
Power-over-Ethernet: Proprietary 24V PoE
Maximum Power Consumption
9W
Surge Protection
Line to Line: 1 KV
Line to Ground: 2 KV
ESD Protection
Contact: 4 KV
Air: 8 KV
Multiple BSSID
EnJet Enabled: Supports 1 SSIDs
EnJet Disabled: Supports 8 SSIDs
Management Interface
Management SSID – allows your mobile device such as smart phone, connect to SSID and easily configuring and monitoring through EnGenius EnWiFi App.
VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging
VLAN Pass-Through
Management VLAN
Spanning Tree
Supports 802.1d Spanning Tree Protocol
QoS (Quality of Service)
Complaint with IEEE 802.11e Standard
WMM
SNMP
v1, v2c, v3
MIB
I/II, Private MIB
Deployment Options
Stand-Alone (Individually Managed/EnWiFi App)
Managed Mode (w/ezMaster/EnSky Series Switch)
Stand-Alone Management Features
Auto Channel Selection
Auto Transmit Power
Wireless STA (Client) Connected List
Guest Network (Only supported when EnJet Disabled)
Fast Roaming (802.11k & 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
Traffic Shaping
VLANs for Access Point – Multiple SSIDs
Backup/Restore Settings
Auto Reboot
Email Alert
Site Survey
Save Configuration as Users Default
Control Features
Operation Mode
Distance Control (ACK Timeout)
Multicast Supported
Wi-Fi Scheduler
Client Traffic Status
RADIUS Accounting
Power Save Mode (U-APSD Support)
CLI Support
HTTPS
Wireless Security
WPA2 PSK & Enterprise (AES)
Hide SSID in Beacons
MAC Address Filtering, Up to 32 MACs per SSID
Wireless STA (Client) Connected List
SSH Tunnel
Client Isolation
Wireless Management Features
ezMaster / EnGenius EnSky Switch/ SkyKey
• Supported when EnJet Disabled
• Monitor only when EnJet Enabled
AP Auto Discovery and Provisioning
AP Auto IP Assignment
AP Group Management
Auto AP Rebooting
AP Device Name Editing
AP Radio Settings
Traffic Shaping
Fast Roaming (802.11k & 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
AP Client Limiting
Client Fingerprinting
AP VLAN Management
VLANs for AP - Multiple SSIDs
Secured Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Email Alert
Wireless Traffic & Usage Statistics
Real-time Throughput Monitoring
Visual Topology View
Floor Plan View
Map View
Wireless Coverage Display
Secure Control Messaging (SSL Certificate)
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import/Export
Bulk Firmware Upgrade Capability
Intelligent Diagnostics
Kick/Ban Clients
Wi-Fi Scheduler
Temperature Range
Operating: -4 ºF~140 ºF (-20 ºC~60 ºC)
Storage: -22 ºF~176 ºF (-30 ºC~80 ºC)
Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less
Waterproof
IP55-Rated Enclosure
EnStationAC Device
Weight: 1.11 lbs. (460 g)
Depth: 7.48” (190mm)
Height: 1.49” (38mm)
Package Contents
2 - EnStationAC Outdoor Access Points
2 - PoE Adapters (EPA2406GR)
4 - Pole-Mounting Brackets
2 - Wall-Mount Screw Sets
2 - Pole-Mounting Straps
2 - Power Cords
2 - Quick Installation Guides
Certifications
FCC
CE
CB
IC
Warranty
1 Year
