Skip to product information

ENH500v3: Wi-Fi 5 Wave 2 Outdoor AC867 5 GHz Wireless Bridge

$95.00
 per 
Just 1 left. Order soon!
Spend $75.00 to FREE SHIPPING

Earn [points_amount] when you buy this item.

View full details

ENH500v3: Wi-Fi 5 Wave 2 Outdoor AC867 5 GHz Wireless Bridge

$95.00
 per 

Streamlined, Long-Range CPE Expands Point-to-Point or Point-to-Multipoint Networks

The ENH500v3 Wireless Bridge leverages the advanced 802.11ac Wave 2 Wi-Fi technology that maximizes wireless speed and is 3x faster than the typical 802.11n speed. EnGenius ENH500v3 features ‘Time Division Multiple Access’ technology that cuts through RF-congested environments within point-to-point/multipoint applications. Offers a high-gain 16 dBi dual-polarized directional antenna that extends the network coverage up to 5 miles point-to-point.


- ENH500v3 Datasheet
- ENH500v3 Quick Install Guide
- ENH500v3 User Manual
- Managed Station Series Datasheet


Shipping & Returns

Not satisfied? We allow returns within 30 days of product purchase

Flexible Management

Operation Modes: Access Point, Client Bridge, WDS Access Point, WDS Station

11ac Wave 2

Supports wireless speeds up to 867Mbps on the 5GHz frequency band

Features

Overview

In-the-Box

Mounting

Deployment

ENH500v3

Specifications

Product Highlights

  • EnJet features ‘Time Division Multiple Access’ technology that cuts through RF-congested environments within point-to-point/multipoint applications

  • 11ac Wave 2 wireless speeds up to 867 Mbps on 5 GHz

  • Beamforming optimizes antenna signal, reception & reliability for clients

  • 27 dBm high transmit power extends Wi-Fi building-to-building

  • High Gain 16 dBi Integrated Directional Antennas extends wireless point-to-point networks up to 5 miles

  • IP55-Rated weatherproof & dustproof housing

  • MU-MIMO improves performance & increases user device capacities

  • GigE PoE port & adapter included for placement where power is limited

  • Flexible operation modes: Access Point, Client Bridge & WDS

  • Simple, intuitive interface via EnWiFi app for local CPE/AP configuring & monitoring

Technical

Standards
IEEE 802.11a/n/ac wave2 on 5 GHz

Processor
Powerful Qualcomm® CPU

Antenna
High-Gain 16 dBi Integrated Directional Antennas

5 GHz (Port 1)
Average Antenna Gain: 16 dBi
Polarization: Linear
Azimuth Beam Width: 18°
Elevation Beam-Width: 58°
VSWR: 1:2.0

5 GHz (Port 2)
Average Antenna Gain: 16 dBi
Polarization: Linear
Azimuth Beam Width: 18°
Elevation Beam-Width: 85°
VSWR: 1:2.0

Physical Interface
2 x 10/100/1000 Base-TX, RJ-45 Gigabit Ethernet Ports
1 x Reset Button (on the EPA2406GR PoE Adapter)

LED Indicators
Power
LAN
WLAN
LINK QUALITY

Power Source

Power-over-Ethernet: Proprietary 24V PoE
PoE Adapter EPA2406GR with RESET button

Maximum Power Consumption
8.9W

Surge Protection
Line to Line: 1 KV
Line to Ground: 2 KV

ESD Protection
Contact: 4 KV
Air: 8 KV

Wireless & Radio Specifications

Operating Frequency
5 GHz

Operation Modes
EnJet Enabled:
Access Point Mode (AP mode)
Client Bridge Mode (CB Mode)
WDS: WDS AP, WDS Station

EnJet Disabled
Access Point Mode (AP mode)
Client Bridge Mode (CB Mode)
WDS: WDS AP, WDS Bridge, WDS Station

Frequency Radio
5 GHz: 5150 MHz, 5180 MHz, 5200 MHz, 5220 MHz, 5240 MHz, 5260 MHz, 5280 MHz, 5300 MHz, 5320 MHz, 5500 MHz, 5520 MHz, 5540 MHz, 5560 MHz, 5580 MHz, 5600 MHz, 5620 MHz, 5640 MHz, 5640 MHz, 5680 MHz, 5745 MHz, 5765 MHz, 5785 MHz, 5805 MHz
Supported radios and channels will be varied on the configured regulatory domain

Transmit Power
Up to 27 dBm on 5 GHz

Tx Beamforming (TxBF)


Radio Chains/Spatial Stream

2x2:2

SU-MIMO
Two(2) spatial stream Single User (SU) MIMO for up to 867 Mbps wireless data rate with VHT80 to a 2x2 wireless device under the 5GHz radio.

MU-MIMO

Two (2) Spatial Stream MU-MIMO up to 867 Mbps wireless data rate for transmitting to two (2) streams MU-MIMO capable wireless devices under 5GHz simultaneously.

Supported Data Rates (Mbps)
5 GHz: Max 867
802.11a: 6, 9, 12, 18, 24, 36, 48, 54
802.11n: 6.5 to 300 Mbps (MCS0 to MCS15)
802.11ac: 6.5 to 867 Mbps (MCS0 to MCS9, NSS = 1 to 2)

Supported Radio Technologies
802.11a/n/ac: Orthogonal Frequency-Division Multiplexing (OFDM)
802.11n/ac: 2x2 MIMO with 2 Streams

Channelization
802.11ac Supports Very High Throughput (VHT)—VHT 20/40/80 MHz
802.11n Supports High Throughput (HT)—HT 20/40 MHz
802.11n/ac Packet Aggregation: AMPDU, ASPDU

Supported Modulation
802.11a/n: OFDM16-QAM, 64-QAM
802.11ac: OFDM 16-QAM, 64-QAM, 256-QAM

Management

Multiple BSSID
EnJet Enabled: Supports 1 SSIDs
EnJet Disabled: Supports 8 SSIDs

Management Interface
Management SSID – allows your mobile device such as smart phone, connect to SSID and easily configuring and monitoring through EnGenius EnWiFi App.
VLAN Tagging
Supports 802.1q SSID-to-VLAN Tagging
VLAN Pass-Through
Management VLAN

Spanning Tree
Supports 802.1d Spanning Tree Protocol

QoS (Quality of Service)
Complaint with IEEE 802.11e Standard
WMM

SNMP
v1, v2c, v3

MIB
I/II, Private MIB

Management Features

Deployment Options
Stand-Alone (Individually Managed/EnWiFi App)
Managed Mode (Access Point mode managed by ezMaster/EWS Series Switch/SkyKey)

Stand-Alone Management Features
Auto Channel Selection
Auto Transmit Power
Wireless STA (Client) Connected List
Guest Network (Only supported when EnJet Disabled)
Fast Roaming (802.11k & 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
Traffic Shaping
VLANs for Access Point – Multiple SSIDs
Backup/Restore Settings
Auto Reboot
Email Alert
Site Survey
Save Configuration as Users Default

Control Features
Operation Mode
Distance Control (ACK Timeout)
Multicast Supported
Wi-Fi Scheduler
Client Traffic Status
RADIUS Accounting
Power save Mode (U-APSD Support)
CLI Support
HTTPS

Wireless Security
WPA2 PSK & Enterprise (AES)
Hide SSID in Beacons
MAC Address Filtering, Up to 32 MACs per SSID
Wireless STA (Client) Connected List
SSH Tunnel
Client Isolation

Wireless Management Features (Access Point Operation Mode ONLY)

ezMaster / EnGenius EnSky Switch/ SkyKey
• Supported when EnJet Disabled
• Monitor only when EnJet Enabled

AP Auto Discovery and Provisioning
AP Auto IP Assignment
AP Group Management
Auto AP Rebooting
AP Device Name Editing
AP Radio Settings
Traffic Shaping
Fast Roaming (802.11k & 802.11r)
Pre-Authentication (802.11i, 802.11x)
PMK Caching (802.11i)
RSSI Threshold
AP Client Limiting
Client Fingerprinting
AP VLAN Management
VLANs for AP - Multiple SSIDs
Secured Guest Network
Access Point Status Monitoring
Wireless Client Monitoring
Email Alert
Wireless Traffic & Usage Statistics
Real-time Throughput Monitoring
Visual Topology View
Floor Plan View
Map View
Wireless Coverage Display
Secure Control Messaging (SSL Certificate)
Local MAC Address Database
Remote MAC Address Database (RADIUS)
Unified Configuration Import/Export
Bulk Firmware Upgrade Capability
Intelligent Diagnostics
Kick/Ban Clients
Wi-Fi Scheduler

Environmental & Physical

Temperature Range
Operating: -4 ºF~140 ºF (-20 ºC~60 ºC)
Storage: -22 ºF~176 ºF (-30 ºC~80 ºC)

Humidity (non-condensing)
Operating: 90% or less
Storage: 90% or less

Waterproof
IP55-Rated Enclosure

Dimensions & Weights

ENH500v3 Device
Weight: 0.91 lbs. (415.5 g)
Width: 3.31” (84 mm)
Length: 10.24” (260 mm)
Height: 2.17” (55 mm)

ENH500v3 Packaging
Weight: 2 lbs. (0.9 kg)
Width: 4.7” (120 mm)
Length: 12” (305 mm)
Height: 4.7” (120 mm)

Package Contents
1 - ENH500v3 Outdoor CPE
1 - PoE Adapter (EPA2406GR)
1 - Pole-Mounting Brackets
1 - Pole-Mounting Strap
1 - Quick Installation Guide

Certifications
FCC
IC
CE
CB

Warranty
1 Year